Smart DIN Relay 2 with built-in power metering functionality

Remote electricity control designed for DIN mounting

Enable your customers to switch groups of electrical appliances of and off remotely, e.g. from a smartphone or a website, with this Zigbee based on/off relay for DIN rail mounting.

Key features:

Remote load switch
Phase dropout alarm
Precision meter (Class 2)
16 A continuous load
Zigbee 3.0 certified
Easy installation in standard DIN rail system

Technical specifications

Monitor power consumption in groups of appliances

Via communication with a gateway, the Smart DIN Relay 2 enables users to configure their appliances in clusters and remotely control a whole group of appliances instead of each device individually.

But what sets the Smart DIN Relay 2 apart from other relays is its built-in power monitoring functionality. This lets users monitor the power consumption of each group of appliances in a building and track consumption remotely, increasing awareness of power waste and encouraging energy optimization.

Get the latest Smart DIN Relay 2 news

Technical specifications
Downloads

General

Dimensions: 90 x 58 x 17.5 mm
Weight: 57 g (with packaging: 94.8 g)
Color: Light grey
Supply voltage: 230V +/- 10%, 50Hz
Power consumption: 0.4 W

Radio

Sensitivity: -101 dBm @ 1% PER
Output power: +8 dBm

Environment

Operation temperature 0 to +50°C
IP class: IP30
Relative humidity 5% - 85%, non condensing
Storage temperature -40°C to +85°C

Specifications power meter

Voltage range: 207 to 253 VAC
Current range: 16 A
Accuracy: Typ +/- 1%
Frequency range: 45-65 Hz, resolution 0.01 Hz
Reported resolution: 1W

Specifications remote control

Max. switch voltage: 250 VAC
Max switch current: 16 A
Overload and over temperature protection

Specifications phase dropout alarm

Via Zigbee

Communication

Wireless protocol

Zigbee 3.0
Zigbee router

Certifications

Conforming to CE, RED, Low Voltage, and RoHS directives
Zigbee 3.0 certified

Smart DIN Relay 2 Datasheet

244 KB

Smart DIN Relay 2 Installation manual

Please note: the link for the installation manual for Smart DIN Relay 2 leads to the installation manual for the product in the frient brand, Develco Products' pre-branded devices.

If you wish to offer this product with a customized installation manual in your brand, the minimal order quantity is 5,000 devices.

Discover how you can get interactive and easy-to-maintain digital manuals in your brand by downloading the brochure below.

Interactive Manuals Brochure

2 MB

Christoffer Kyk

Sales Manager

Interested in using our products for your IoT solution?

Send us your name, email address, and a couple of lines describing your project and the products you are interested in. We will then contact you to discuss your project and all the possibilities further.

Smart DIN Relay 2